/* builder_capabilities: carousel */ /* CSS OWNS CAROUSEL LAYOUT — BEFORE AND AFTER HYDRATION. These rules are deliberately NOT gated on [data-ch-widget-mounted]. The host is the scroll track in both states, so the browser sizes the slides once and the same geometry survives the handoff. JS never writes a width. That is the whole point of the design: previously the pre-paint used these @container bands while the mounted carousel re-derived a count in JS from a measured box, and the two disagreed (different boxes, and react-multi-carousel only re-read its `responsive` prop at mount / window-resize, so a container change couldn't re-apply without a forced remount). Now there is ONE source of truth for column widths and it is this stylesheet. Below 620px: always 1 slide. Author's mobile count is intentionally ignored — sub-620 containers can't show >1 card without each becoming illegible. Hero variants are excluded; they use a plain block layout below. SPECIFICITY — READ BEFORE EDITING. This block is deliberately NOT wrapped in `:where()`. The doubled attribute selector is (0,4,0), which clears both competing sources in one move: * the global reset's `body div { margin: 0; padding: 0 }` (0,0,2) — _ui/lib/css/reset.css; * per-module block CSS, scoped by scopeBuilderCss to `#builder-module- .rsg-carousel` (1,1,0) — ListingCarousel 2122 alone ships `padding:0`, `gap:clamp(11px,1.75vw,22px)` and `@media(min-width:881px){overflow-x:visible}`, every one of which broke a different part of this layout when it won. These properties are STRUCTURAL: the host is a scroll-snap track whose child widths are computed by the @container bands below, and each of the three authored overrides above silently desynced that computation. Authors tune the carousel through `--bv-carousel-gap` / `--bv-carousel-*` (which feed the calcs consistently), not by restyling the track. Cosmetics are NOT claimed here — background, border, padding-block, colour and so on stay authorable at normal specificity. */ [data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"]):not([data-ch-widget-mounted="never"]) { /* `container-type: inline-size` applies `contain: … inline-size`, which computes this element's inline size AS IF IT HAD NO CONTENTS. That is what makes the bands safe: a 20-slide flex line is ~6000px wide, but its intrinsic contribution is zeroed, so it can never inflate the queried box — it simply overflows and scrolls. (Worst case under hostile authored CSS is "too narrow", never 6000px.) NOTE an element can never query its OWN container, so the bands below size the SLIDES (descendants), not this element. */ container-type: inline-size; display: flex; flex-wrap: nowrap; /* The band calc()s below subtract exactly this value to size each slide, so the rendered gap and the gap they assume MUST be the same number. Left at `:where()` (0,0,0) an authored `gap` (e.g. ListingCarousel's `clamp(11px,1.75vw,22px)`) silently replaced the spacing WITHOUT changing what the calc subtracted, and the slides overflowed the track by the difference — measured 11px, which clipped the last visible card. Authors who want a different gap set `--bv-carousel-gap`; that keeps the two in agreement by construction. */ gap: var(--bv-carousel-gap, 16px) !important; /* Native scroll, not overflow:hidden + transforms. A scroll container's automatic minimum size is 0, a second independent guarantee against content-driven inflation — and it gives us free momentum/touch scrolling, so the widget needs no drag implementation. Mirrors the shape ListEjectBase.php ships for every ejected slider. `!important` on the x axis is load-bearing. Block CSS is scoped per module (scopeBuilderCss → `#builder-module-`), so an authored `.rsg-carousel` rule is (1,1,0) and outranks this `:where()` (0,0,0). ListingCarousel 2122 ships `@media (min-width:881px){ .rsg-carousel{ overflow-x: visible } }` — correct when the host was a static row, fatal now that the host IS the scroller, because a non-scrollable track can't be paged by the arrows. (It currently survives only by accident: `overflow-y: hidden` forces the x axis to compute as `auto`. Don't depend on that side effect.) */ overflow-x: auto !important; overflow-y: hidden; scroll-snap-type: x mandatory; scrollbar-width: none; -webkit-overflow-scrolling: touch; } :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"]))::-webkit-scrollbar { display: none; } /* NO ARROW GUTTER HERE — deliberately. This used to carry an unconditional @media (min-width:800px){ [data-ch-widget="carousel"]:not([type=hero]) { margin-inline:46px } } to keep the old absolutely-positioned overlay arrows off the first and last cards. It was right about the mechanism (margin, not padding: a scroll container's inline padding scrolls with its content and cannot hold a gutter) and wrong about the scope — it inset EVERY non-hero carousel, including single-slide ones that never built arrows at all. Moot now: those overlay arrows are gone entirely, replaced by the `.ch-pgbar` chrome bar that sits BELOW the track and costs it no width. Reserving inline space here would still be actively harmful: the host carries `container-type: inline-size` and the slide-count bands below query it, so a gutter would shrink the queried box and could drop a carousel a whole band (cost it a column). Nothing to reserve here. */ /* Default (mobile / unqueried): one slide fills the container. `:not(.chc-carousel)` excludes the static runtime's mounted SHELL. That runtime reparents every slide under a single `.chc-carousel` wrapper, after which `> *` matches THAT WRAPPER instead of the slides these rules are written for — so the wrapper wore the slide's `flex` basis and, worse, its `content-visibility`/`contain-intrinsic-size` (skipping the whole carousel's layout and reporting the 400px placeholder as its height). runtime.js already re-asserts both axes on `.chc-carousel` and wins on specificity; this guard is the belt to that pair of braces, so a FUTURE mount path that reparents slides can't silently inherit slide styling again. */ :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"])) > *:not(.chc-carousel) { flex: 0 0 100%; min-width: 0; scroll-snap-align: start; /* MEMORY hint for long carousels: skip style/layout/paint/decode for slides outside the viewport. Added while chasing an iOS Safari OOM tab-kill on a 99-card listing carousel (mclaneresidential.com). ⚠ MEASURED, so nobody re-litigates it: this does NOT reduce image FETCHES. An A/B on a faithful 99-slide replica loaded 5/99 images WITH it and 5/99 WITHOUT — `loading="lazy"` already caps horizontal overflow on its own, so the "all slides share a vertical band, therefore all images load" theory is wrong at least in Chromium. Kept because it is provably free (geometry verified byte-identical: scrollWidth 40178 = 99×390 + 98×16, all slide widths equal, flex-basis untouched) and may still cut decode/layout cost on Safari, which could not be tested here. It is NOT the fix — the fetch clamp in WebsitePage::listingFetch is. Slides stay in the DOM with a real `src`, so crawlability and the pre-paint-matches-hydrated geometry contract this file protects are both unchanged. Virtualization would break that contract (server and client DOM would differ, and `track.scrollWidth`, which the arrow/dot math reads, would shift as you scroll). The inline axis stays owned by the `flex: 0 0 …` bands; `contain-intrinsic-size: auto` only supplies a placeholder for the skipped axis. Safe against the @container bands: `container-type: inline-size` above already zeroes the flex line's intrinsic contribution. ⚠ THE PLACEHOLDER SETS THE CAROUSEL'S HEIGHT — it is not "inert for layout". Slides are flex items in a nowrap row, so EVERY slide feeds the line's cross-size, and a SKIPPED slide feeds the placeholder instead of its real height. One 400px placeholder therefore sized the whole carousel. Measured on teamprice.com /cities/austin-tx/houses: 71px subdivision cards, slides 1-3 onscreen at 71px, slides 4+ skipped at 400px → host 410px, ~340px of dead space under a one-line card. Fixed in two halves, and BOTH are load-bearing: 1. `auto none` on the skipped slides, so a skipped slide contributes nothing and the tallest REAL slide wins. 2. `content-visibility: visible` on the first 4 (`--bv-carousel-large`, the most that are ever visible at once), so at least one slide always lays out for real. Half 1 alone is WRONG and was measured wrong before this comment existed: with every slide skipped, a carousel that is offscreen on a COLD load has no remembered size for `auto` to reuse, so all slides report nothing and the carousel collapses to 0 — verified on the teamprice.com homepage listing carousel (380px cards, 0px host), which is a scroll-jump/CLS bug traded for the blank-space one. Pinning the leading slides gives `auto` a real height to report at all times: 380px cold and warm, on and off screen. The memory win is kept where it matters — a 99-card carousel still skips 95. */ content-visibility: auto; contain-intrinsic-size: auto none; } /* See the two-halves note above: the leading slides must always lay out, or an offscreen carousel has no size on a cold load. -n+4 tracks the largest `--bv-carousel-*` count. Surveyed 2026-08-12 across every website_section_blocks + website_page_modules row: the max anywhere is 4 (`--bv-carousel-large:4` / `data-ch-carousel-items="1,2,3,4"`), so 4 covers every carousel that ships today with no slide to spare. IF A WIDER BAND IS EVER ADDED, RAISE THIS TO MATCH — a 5-up carousel would skip its 5th visible slide, and if that slide is the tallest the carousel shrinks under its own content. Keep it >= the largest count, never below. */ :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"])) > *:not(.chc-carousel):nth-child(-n+4) { content-visibility: visible; } @container (min-width: 620px) { :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"])) > *:not(.chc-carousel) { flex: 0 0 calc((100% - var(--bv-carousel-gap, 16px) * (var(--bv-carousel-tablet, 2) - 1)) / var(--bv-carousel-tablet, 2)); } } /* @container, NOT @media — and 801 / 1201, not 900 / 1200. Why the container: every builder carousel sits inside a horizontal wall (--ch-wall-horiz-width, default 1200px) plus padding, or an authored max-width, so the container is ALWAYS narrower than the viewport. Measuring the viewport picked a band the carousel had no room for — an 885px viewport chose the 3-up desktop band for a 728px container, giving 243px cards. With a default wall the container never exceeds 1200, so the wide slot is unreachable and a default site settles at the desktop count; widening the wall past 1200 is what earns the 4th column. (The bands used to read 900, which made 801-900px paint the TABLET count and then snap to desktop on hydration — same class of mismatch, viewport axis.) */ @container (min-width: 801px) { :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"])) > *:not(.chc-carousel) { flex: 0 0 calc((100% - var(--bv-carousel-gap, 16px) * (var(--bv-carousel-desktop, 3) - 1)) / var(--bv-carousel-desktop, 3)); } } @container (min-width: 1201px) { :where([data-ch-widget="carousel"]:not([data-ch-carousel-type="hero"])) > *:not(.chc-carousel) { flex: 0 0 calc((100% - var(--bv-carousel-gap, 16px) * (var(--bv-carousel-large, 4) - 1)) / var(--bv-carousel-large, 4)); } } /* NO POST-HYDRATION RESET — deliberately removed. There used to be a `[data-ch-widget-mounted="client"] { display:block !important; gap:normal !important; overflow:visible !important }` rule here. It existed for exactly one reason: react-multi-carousel replaced the host's children with a single wrapper div, and a lone flex item with no basis inside the authored `.rsg-carousel { display:flex }` collapsed to width 0, so the library measured 0 and rendered an empty track. The mounted carousel no longer replaces the host's children — the slides stay direct children of the host, which stays the flex/scroll track in both states. Resetting it to `display:block` would now BREAK the layout rather than rescue it. Blocks authoring `.rsg-carousel { display:flex; gap:…; overflow-x:auto }` at (1,1,0) are simply declaring what this bundle already wants, so their higher specificity is harmless — that authored shape IS the target shape. Do NOT confuse this with the superficially-similar rules in EjectSupport.php (~7863) and SectionBlocks.php (~7187). Those belong to the RUNTIME-LESS path (screenshots / no-JS export): they stamp mounted="client" and hide every slide but the first, so a static capture shows one clean card instead of a clipped row. That behaviour is still correct and is deliberately left alone. Also note there is deliberately NO post-hydration per-slide width override. A previous attempt forced flex/width/max-width:100% !important on mobile, but `100%` resolved against the FLEX TRACK (N x the container width) and blew each card out to thousands of px. Slide widths come from the @container bands above and nowhere else. */ /* ── The shell ────────────────────────────────────────────────────────────── Emitted by the server paint (BuilderCapabilities::wrapCarouselShell) and by the widget as a fallback. It wraps ONLY the track, and it is the containing block every piece of chrome positions against. WHY IT EXISTS: the widget used to adopt `track.parentElement` — whatever the section block wrapped the carousel in. On ListingCarousel that is `.lc-container`, which also carries the heading and the CTA footer, so `top:50%` centred the arrows on the whole section (measured 50px high) and appended dots after the CTA button. The shell's height IS the track's height, so both are correct by construction rather than by luck. NO PADDING HERE — deliberately. `container-type: inline-size` lives on the host and the slide-count bands (801/1201 below) query it, so insetting the host would shrink the queried box by the gutter and could drop a carousel a whole band (a 1283px host would fall under 1201 and lose its 4th column). The arrows instead hang OUTSIDE the track on negative offsets: the gutter is paid by the section's own horizontal padding, which every wall already has, and the column count is untouched. */ [data-ch-carousel-shell] { position: relative; /* A grid whose FIRST ROW is the track. The arrows are placed in that row (grid-row: 1) and stretched, so `top:50%` resolves against the CARDS — not against the shell, which also contains the dots row beneath them. Centring on the shell left them 12px low here and, in the old authored-wrapper world, 50px high. */ display: grid; grid-template-columns: 1fr; } /* ── Chrome ───────────────────────────────────────────────────────────────── The overlay arrows and dots that used to live here are GONE. Both lanes now adopt the server-painted `.ch-pgbar` that BuilderCapabilities::buildCarouselBar emits (React: widgets/index.tsx; vanilla: runtime.js, whose buildArrows only adopts and whose buildDots is a no-op stub). Nothing has emitted `.ch-carousel-arrows` / `.ch-carousel-dots` elements since that switch, so their rules were dead weight shipping on every page and are removed. Hero keeps its own overlay arrows on a separate path (`.chc-hero_arrows`). `[data-ch-carousel-chrome]` stays: it is the pointer-events guard for genuine overlay chrome, and removing it would let a transparent layer eat track clicks. */ [data-ch-carousel-chrome] { pointer-events: none; } [data-ch-carousel-shell] > [data-ch-widget="carousel"] { grid-row: 1; grid-column: 1; min-width: 0; } /* builder_capabilities: tabs */ :where([data-ch-widget="tabs"][data-ch-widget-mounted="server"] [data-ch-tab-panel][hidden]) { display: none; } :where([data-ch-widget="tabs"][data-ch-widget-mounted="server"] [data-ch-tab][aria-selected="true"]) { font-weight: 600; } /* builder_capabilities: accordion */ :where([data-ch-widget="accordion"][data-ch-widget-mounted="server"]) > details { /* Native

handles open/close pre-JS. The client widget upgrades to single-mode (closes siblings on open) on hydrate. */ } :where([data-ch-widget="accordion"][data-ch-widget-mounted="server"]) > details > summary { cursor: pointer; list-style: none; } :where([data-ch-widget="accordion"][data-ch-widget-mounted="server"]) > details > summary::-webkit-details-marker { display: none; } /* builder_capabilities: wall_horiz */ [data-ch-widget*="wall_horiz"][data-ch-widget-mounted="server"] { max-width: var(--ch-wall-horiz-width, 1200px); margin: 0 auto; width: 100%; padding-inline: var(--ch-wall-horiz-padding, clamp(16px, 3vw, 32px)); position: relative; z-index: 1; } /* builder_capabilities: wall_vert */ [data-ch-widget*="wall_vert"][data-ch-widget-mounted="server"] { padding-top: var(--ch-wall-vert-padding-top, var(--ch-wall-vert-padding, clamp(40px, 6vw, 72px))); padding-bottom: var(--ch-wall-vert-padding-bottom, var(--ch-wall-vert-padding, clamp(40px, 6vw, 72px))); position: relative; z-index: 1; } /* builder_capabilities: grid-paginator */ [data-ch-widget="grid-paginator"][data-ch-widget-mounted="server"] { display: flex; align-items: center; /* NO justify-content here. The host is now also the chrome bar (it carries .ch-pgbar--sides|centered|left|right), and a `center` on this two-attribute selector would outrank every one of those single-class placement rules — the operator's choice would silently do nothing. Placement is the bar's job; this rule owns only the sticky strip's own box. */ gap: 14px; margin-top: clamp(24px, 5vw, 40px); /* Sticky is PROGRESSIVE ENHANCEMENT, deliberately. It engages only when no ancestor clips: ~19 of the 44 blocks carrying this host set `overflow:hidden` on their own root (.bv-team-grid, .rsg-section, .testimonial-grid-section, .bv-articles-list …), which kills position:sticky outright. Those blocks keep exactly today's static bar — hence the margin above STAYS, so the fallback never jams the bar against the last row. The mounted guard matters: the host ships before the engine reveals the nav, and painting a background on an unmounted host would streak a bar across single-page grids (total <= limit) that never show a pager. */ position: sticky; bottom: 0; z-index: 20; /* --ch-bg-color is stamped on the SECTION wrapper from the section's resolved background row (WebsiteSchemes ~1756), not just :root — so this tracks the block's own background rather than the page's. */ background: var(--ch-bg-color, transparent); /* Inline padding, not just block. With `sides` placement the two halves are pushed to the strip's own edges, so a bare `8px 0` left the rail and the next button flush against it — the bar read as clipped rather than inset. 12px each side gives both ends the same breathing room. */ padding: 8px 12px; } /* ABOVE THE GRID. expandGridPaginatorHosts moves the host in front of the row list and stamps `data-ch-paginator-above`, so the chrome bar — search, sort and the pager — sits at the TOP of the grid and sticks there while the visitor scrolls the cards, instead of below a screenful of rows. It sticks to `--nav-height` rather than 0 so it parks BELOW the site's own sticky nav instead of underneath it. --supernav-height is added when present (the same pair listPaginatorJs already subtracts when it scrolls a page into view); both fall back to 0px, so a site with no sticky nav gets `top: 0`. The margin flips with the position: above the grid the bar needs room BELOW it, not above, or it sits flush against the first row. */ [data-ch-widget="grid-paginator"][data-ch-widget-mounted="server"][data-ch-paginator-above] { top: calc(var(--nav-height, 0px) + var(--supernav-height, 0px)); bottom: auto; margin-top: 0; margin-bottom: clamp(16px, 3vw, 24px); } /* BOTTOM-POSITIONED BAR. The `paginator_position` fetch filter picks which end of the grid the chrome bar rides; `bottom` restores the original layout, where the strip sits after the rows and pins to the VIEWPORT FLOOR as you scroll. A block that already owns a toolbar wants this: ListingSearchLocal ships Grid/Map/List tabs and its own search field, so a second strip above the cards duplicates chrome the visitor already has. A plain grid keeps `top`. Only the sticky EDGE and the margin flip here. The DOM move is skipped server-side for `bottom` (expandGridPaginatorHosts leaves the host where the block authored it, after the rows), so there is nothing to re-order — the base `bottom: 0` rule already applies and this just makes the intent explicit and overrides the `above` rule if both ever land together. */ [data-ch-widget="grid-paginator"][data-ch-widget-mounted="server"][data-ch-paginator-position="bottom"] { top: auto; bottom: 0; margin-top: clamp(24px, 5vw, 40px); margin-bottom: 0; } /* Fallback for a host that never got bar classes (an un-migrated block, or one whose paginator type could not be resolved): keep today's centred strip. */ [data-ch-widget="grid-paginator"][data-ch-widget-mounted="server"]:not(.ch-pgbar) { justify-content: center; } /* A nav that is hidden (single-page grid) must not reserve the sticky strip. */ [data-ch-widget="grid-paginator"][data-ch-widget-mounted="server"]:has(> nav[hidden]) { position: static; background: none; padding: 0; } /* The nav carries its own layout. Scoped on BOTH the grid's host wrapper and the bare `.ch-pg` class because a CAROUSEL emits the same nav with no [data-ch-widget="grid-paginator"] host around it — every rule below that was host-scoped simply did not match there, and the buttons collapsed to ~20px. */ [data-ch-widget="grid-paginator"] > nav, .ch-pg { display: flex; align-items: center; gap: 14px; /* Containing block for the rail below, so an absolutely-positioned rail resolves against THIS nav on every variant rather than escaping to some distant positioned ancestor. `simple` also declares it for its own groove; stating it here makes the rail's containment variant-independent. */ position: relative; } /* THE RAIL IS NEVER A FLEX ITEM. listPaginatorJs writes `width: <100/pages>%` and a translateX onto `.ch-pg_rail` for EVERY variant — it does not know or care which one is active. Only `simple` styles the rail into a travelling groove (position:absolute, below) and `slim` hides it outright; `modern` did neither, so the element kept its inline 12.5% width IN FLOW and claimed an eighth of the bar as blank space between the label and the next arrow. Taking it out of flow here makes that impossible for any variant, present or future: a variant that wants a visible rail positions it, and one that does not pays nothing. Reported on teddy.chl.local with the modern slab. */ .ch-pg_rail { position: absolute; pointer-events: none; } /* Chevron glyphs — the static lane ships inline SVG, the React lane an entity. */ .ch-pg button svg { width: 20px; height: 20px; stroke: currentColor; fill: none; stroke-width: 2.25; } [data-ch-widget="grid-paginator"] > nav[hidden] { display: none !important; } /* The 999px-radius circular buttons this used to draw are RETIRED — that was the legacy grid look and is no longer one of the three options. Every paginator is now the joined module below: a bordered group with the progress rail along its top edge. */ [data-ch-widget="grid-paginator"] button, .ch-pg button { display: inline-flex; align-items: center; justify-content: center; width: 40px; height: 40px; padding: 0; border: 1px solid var(--ch-text-color-accent, var(--ch-text-color, rgba(15, 28, 46, 0.16))); border-radius: 0; background: var(--ch-card-bg, transparent); color: var(--ch-card-text-color, var(--ch-text-color, inherit)); cursor: pointer; transition: background-color 0.15s ease, border-color 0.15s ease, opacity 0.15s ease; } /* Mask icons are PAINTED via background-color, not `color` (see WebsiteSchemes' moduleStylesGlobal icon accent rule) — so the accent has to land on background, and a bare `background:` shorthand here would wipe the mask itself. */ /* Mask icons are PAINTED via background-color, not `color`, so the accent has to land on background and a bare `background:` shorthand would wipe the mask. All three lanes now emit `` — the React carousel used a `‹` text entity and the static runtime an inline SVG, which is why one control looked different depending on who drew it. Sized here, once, for every lane. */ [data-ch-widget="grid-paginator"] button i[data-mask-icon], .ch-pg button i[data-mask-icon] { background-color: var(--ch-text-color-accent, var(--ch-text-color, currentColor)); width: 18px; height: 18px; } [data-ch-widget="grid-paginator"] button:hover:not(:disabled), .ch-pg button:hover:not(:disabled) { border-color: var(--ch-text-color-accent, var(--ch-color-primary, currentColor)); color: var(--ch-text-color-accent, var(--ch-color-primary, currentColor)); } [data-ch-widget="grid-paginator"] button:disabled, .ch-pg button:disabled { opacity: 0.4; pointer-events: none; } [data-ch-widget="grid-paginator"] button[hidden], .ch-pg button[hidden] { display: none !important; } /* NO min-width. The label holds anything from "2 of 5" to "1-18 of 240", so a fixed floor sized for one form leaves the other visibly padded — it collapses to whatever it needs instead, and `nowrap` is the only guarantee required. `tabular-nums` keeps the digits from jittering as the count changes width. */ [data-ch-widget="grid-paginator"] [data-ch-page-label], .ch-pg [data-ch-page-label] { text-align: center; font-weight: 600; color: var(--ch-text-color, inherit); font-variant-numeric: tabular-nums; white-space: nowrap; } /* ── PAGINATOR VARIANTS ───────────────────────────────────────────────────── One markup shape, three looks. The engine (EjectSupport::listPaginatorJs) binds [data-ch-page] and [data-ch-page-label] and is variant-blind, so these are pure presentation and the static export lane needs no extra code. `simple` is the historical bar and adds nothing — an un-migrated block, or one whose operator never picked a style, renders byte-identical to today. PLACEMENT IS A SEPARATE AXIS from the look. A grid keeps the sticky, centered strip above; a carousel gets the static, right-aligned form via .ch-pg--incarousel. The same variant therefore reads the same in both contexts and only its position differs. */ /* SIMPLE (default) — the approved "rail as the top edge" control, and the LIGHTEST of the three: there is NO container border. Only the buttons are outlined; the count sits to their LEFT as bare text, and the progress rail runs above the whole control. Source order is prev / label / next (one markup for every variant, so the engine and the export lanes never branch), and `order` moves the label ahead of both buttons — the buttons end up together on the right, which is what makes this read as "a count, then a control" rather than a segmented widget. The rail is a travelling WINDOW: 1/pages wide, sliding to (page-1)/pages, so BOTH its edges move. A bar that only grew from the left would read as "how full" rather than "where am I". */ .ch-pg--simple , [data-ch-prop-paginator_variant="simple"] .ch-pg { position: relative; /* 16px, not the bar's default 8: with no container border the count and the buttons are two loose objects, and at 8px they read as one crowded clump. Double the gap gives the label room to be its own thing. */ gap: 16px; padding-top: 11px; /* rail height + breathing room */ /* fit-content AND flex-none: inside the chrome bar the nav is a flex item and would otherwise stretch, dragging its groove across the whole row instead of sitting over the control it measures. */ width: fit-content; flex: none; } /* the unfilled groove, spanning the whole control */ .ch-pg--simple::before , [data-ch-prop-paginator_variant="simple"] .ch-pg::before { content: ""; position: absolute; top: 0; left: 0; right: 0; height: 3px; border-radius: 2px; background: var(--ch-text-color, rgba(15, 28, 46, 0.16)); opacity: 0.22; } /* the travelling window; width/transform are set by the runtime */ .ch-pg--simple .ch-pg_rail , [data-ch-prop-paginator_variant="simple"] .ch-pg .ch-pg_rail { position: absolute; top: 0; left: 0; height: 3px; border-radius: 2px; background: var(--ch-text-color-accent, var(--ch-text-color, currentColor)); transition: transform 0.3s cubic-bezier(0.4, 0, 0.2, 1), width 0.3s cubic-bezier(0.4, 0, 0.2, 1); } /* Count first, buttons together after it. */ .ch-pg--simple [data-ch-page-label] , [data-ch-prop-paginator_variant="simple"] .ch-pg [data-ch-page-label] { order: 1; /* Flush LEFT against the rail's own left edge — the label and the groove above it share a starting line, which is what ties the two together as one control. No right padding: the bar's 8px gap already separates it from the buttons, and anything more reads as a hole. */ padding: 0; border: 0; } .ch-pg--simple button[data-ch-page="prev"] , [data-ch-prop-paginator_variant="simple"] .ch-pg button[data-ch-page="prev"] { order: 2; } .ch-pg--simple button[data-ch-page="next"] , [data-ch-prop-paginator_variant="simple"] .ch-pg button[data-ch-page="next"] { order: 3; } /* Buttons carry the only borders on this variant, and sit flush together. */ .ch-pg--simple button , [data-ch-prop-paginator_variant="simple"] .ch-pg button { border-radius: 8px; border-width: 1px; } .ch-pg--simple button[data-ch-page="prev"] , [data-ch-prop-paginator_variant="simple"] .ch-pg button[data-ch-page="prev"] { margin-right: -4px; } /* ── SIMPLE IS THE DEFAULT, INCLUDING FOR UNSTAMPED INSTANCES ─────────────── The variant rules above key on `data-ch-prop-paginator_variant`, which only exists once an operator has opened the switcher and saved. Every instance that nobody has touched carries NO stamp — measured 20 of 21 in production — and matched none of the three variants, so it painted with base button styling only: no rail, no groove, no radius. That is the "unstyled" bar reported on teddy.chl.local. `simple` is the product default, so an unstamped bar must render as `simple` rather than as nothing. Repeating the declarations here (instead of moving them onto the base `.ch-pg`) is deliberate: `modern` and `slim` override most of simple's rules but NOT `padding-top` or the `::before` groove, so basing them would leak an 11px gap and a stray groove into both. Scoped with `:has()` on the SECTION root — the element that carries the variant stamp alongside `data-ch-preset-source-id` — so this matches only a genuinely unstamped instance and never competes with an explicit choice. `:has()` is already relied on elsewhere in this bundle. */ section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg { position: relative; gap: 16px; padding-top: 11px; width: fit-content; flex: none; } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg::before { content: ""; position: absolute; top: 0; left: 0; right: 0; height: 3px; border-radius: 2px; background: var(--ch-text-color, rgba(15, 28, 46, 0.16)); opacity: 0.22; } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg .ch-pg_rail { position: absolute; top: 0; left: 0; height: 3px; border-radius: 2px; background: var(--ch-text-color-accent, var(--ch-text-color, currentColor)); transition: transform 0.3s cubic-bezier(0.4, 0, 0.2, 1), width 0.3s cubic-bezier(0.4, 0, 0.2, 1); } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg [data-ch-page-label] { order: 1; padding: 0; border: 0; } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg button[data-ch-page="prev"] { order: 2; margin-right: -4px; } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg button[data-ch-page="next"] { order: 3; } section:not([data-ch-prop-paginator_variant]) .ch-pgbar > .ch-pg button { border-radius: 8px; border-width: 1px; } /* MODERN — one slab: shared borders, square corners except the bottom two, and a flat top edge. The segments must touch, so the gap collapses and the buttons lose their pill radius. */ .ch-pg--modern , [data-ch-prop-paginator_variant="modern"] .ch-pg { gap: 0 !important; border-radius: 0 0 8px 8px; /* clips the square segments into the slab's own rounded bottom corners */ overflow: hidden; width: fit-content; } .ch-pg--modern button, [data-ch-prop-paginator_variant="modern"] .ch-pg button, .ch-pg--modern [data-ch-page-label] , [data-ch-prop-paginator_variant="modern"] .ch-pg [data-ch-page-label] { border-radius: 0; border: 1px solid var(--ch-text-color-accent, var(--ch-text-color, rgba(15, 28, 46, 0.16))); height: 48px; } /* Adjacent segments share one edge so the seams do not double up. */ .ch-pg--modern button + button, [data-ch-prop-paginator_variant="modern"] .ch-pg button + button, .ch-pg--modern button + [data-ch-page-label], [data-ch-prop-paginator_variant="modern"] .ch-pg button + [data-ch-page-label], .ch-pg--modern [data-ch-page-label] + button , [data-ch-prop-paginator_variant="modern"] .ch-pg [data-ch-page-label] + button { border-left: 0; } .ch-pg--modern [data-ch-page-label] , [data-ch-prop-paginator_variant="modern"] .ch-pg [data-ch-page-label] { display: inline-block; /* Slab height minus the top border, so the text sits optically centred. */ line-height: 47px; /* Enough to clear the shared borders on both sides, no more — the slab should hug "2 of 5" rather than reserve room for a longer string. */ padding: 0 12px; background: var(--ch-card-bg, transparent); /* Match the chevrons rather than body text: the label is part of the control, and the accent is what the arrows already paint with. Falls back to inherited text colour on a scheme that sets no accent. */ color: var(--ch-text-color-accent, inherit); } /* Concentric corners: the slab clips at 8px, so a square segment underneath has its own 1px border sliced through at the curve. The inner radius must be the outer MINUS the border width or the border visibly breaks at the corner. */ /* Inner radius = outer MINUS the border width, or overflow:hidden slices each segment's own border at the curve. All four corners now, since modern has no rail keeping its top edge flat. */ .ch-pg--modern button:first-of-type , [data-ch-prop-paginator_variant="modern"] .ch-pg button:first-of-type { border-top-left-radius: 7px; border-bottom-left-radius: 7px; } .ch-pg--modern button:last-of-type , [data-ch-prop-paginator_variant="modern"] .ch-pg button:last-of-type { border-top-right-radius: 7px; border-bottom-right-radius: 7px; } /* SLIM — the same parts as the others, UNFUSED: separate outlined buttons with a gap between them, the count between the arrows. No container, no rail, no shared borders. The lightest of the three, and the only one where the two buttons are not adjacent. */ .ch-pg--slim , [data-ch-prop-paginator_variant="slim"] .ch-pg { gap: 8px; } .ch-pg--slim .ch-pg_rail , [data-ch-prop-paginator_variant="slim"] .ch-pg .ch-pg_rail { display: none; } .ch-pg--slim button , [data-ch-prop-paginator_variant="slim"] .ch-pg button { border-radius: 8px; border-width: 1px; } .ch-pg--slim [data-ch-page-label] , [data-ch-prop-paginator_variant="slim"] .ch-pg [data-ch-page-label] { padding: 0 4px; border: 0; } /* ── THE CHROME BAR ───────────────────────────────────────────────────────── One row beneath a carousel's track, or inside a grid's sticky strip, holding up to two halves: the block's buttons and its paginator. Three axes describe it (see WebsitePage::paginatorBarClasses, which resolves them): ordering ch-pgbar--buttons_first | --paginator_first | --stacked placement ch-pgbar--sides | --centered | --left | --right variant ch-pg--simple | --modern | --slim (on the nav itself) Ordering is expressed with `order`, not by reordering the DOM: the paginator must stay after the buttons in source order for tab sequence and for the Mustache token's position in authored HTML. */ .ch-pgbar { display: flex; align-items: center; gap: 16px; flex-wrap: wrap; margin-top: 18px; width: 100%; /* DEFAULT PLACEMENT lives on the base rule, not on a `--sides` modifier. The axes are per-instance and arrive as `data-ch-prop-paginator_*` stamps, which most instances do not carry (only an operator who has opened the switcher has one). Defaulting here means an unstamped bar renders exactly as it always has, and the stamps below are pure overrides rather than a requirement. */ justify-content: space-between; } .ch-pgbar > .ch-pgbar_buttons { display: flex; align-items: center; gap: 10px; flex-wrap: wrap; } /* The bar is a real row, never an overlay, so everything in it is clickable. Stated explicitly because `[data-ch-carousel-chrome]` sets pointer-events:none for the OLD overlay chrome — if the bar ever lands inside one of those subtrees, or an authored wrapper sets it, the buttons and the paginator go dead while still looking perfect. */ .ch-pgbar, .ch-pgbar * { pointer-events: auto; } /* except a disabled arrow, which must stay inert */ .ch-pgbar button:disabled { pointer-events: none; } /* ORDERING. buttons_first is source order and needs no rule. */ .ch-pgbar--paginator_first > .ch-pgbar_buttons { order: 2; } .ch-pgbar--paginator_first > .ch-pg { order: 1; } .ch-pgbar--stacked { flex-direction: column; align-items: stretch; } /* Stacked puts the PAGINATOR on top, whatever the source order. */ .ch-pgbar--stacked > .ch-pg { order: 1; } .ch-pgbar--stacked > .ch-pgbar_buttons { order: 2; } /* PLACEMENT. `sides` pushes the halves apart; the rest collapse the group and move it as a unit. On a stacked (column) bar these align the column instead. */ .ch-pgbar--sides { justify-content: space-between; } .ch-pgbar--centered { justify-content: center; } .ch-pgbar--left { justify-content: flex-start; } .ch-pgbar--right { justify-content: flex-end; } /* GATHERED placements need more air than `sides` does. When the two halves are pushed to opposite edges the whole row separates them; collapsed together they are touching, and the bar's 16px reads as one run of controls rather than two groups. 22px (+40%) keeps them related but distinct. Not applied to `sides`, where the gap does nothing. */ .ch-pgbar--centered, .ch-pgbar--left, .ch-pgbar--right { gap: 22px; } /* STACKED runs vertically, and vertical distance reads much larger than the same number horizontally — two rows 22px apart look like two unrelated blocks. Pull them back to 7px (-40% from the row's 12px) so the paginator and the buttons read as one stacked unit. This MUST come after the gathered rule above: `.ch-pgbar--stacked` and `.ch-pgbar--right` are both single-class selectors, so on stacked+right the later one wins — without this the 22px horizontal value would leak into the column. */ .ch-pgbar--stacked { gap: 7px; } .ch-pgbar--stacked.ch-pgbar--centered { align-items: center; } .ch-pgbar--stacked.ch-pgbar--left { align-items: flex-start; } .ch-pgbar--stacked.ch-pgbar--right { align-items: flex-end; } /* paginatorBarClasses() rewrites stacked+sides to stacked+centered, so this pair is never emitted — but authored HTML can carry any classes, and `sides` on a column would otherwise fall through to `align-items: stretch` and read as left-aligned. Defensive, not dead. */ .ch-pgbar--stacked.ch-pgbar--sides { justify-content: flex-start; align-items: center; } /* ── THE FILTERS BAR — search + sort, a THIRD child of the chrome bar ─────── WebsitePage::gridFiltersBarXml injects `.ch-fbar` into the same host as the paginator when an operator enables Show Search / Show Sort. It is OPT-IN, so every rule here is inert on the grids that do not carry one. Source order is buttons -> filters -> paginator. The visual order below is `order` only, never a DOM move — same contract the ordering axis already keeps, so tab sequence follows the markup on every arrangement. */ .ch-fbar { display: flex; align-items: center; /* MATCH THE PAGER'S BUTTONS, which are an explicit 40px square (.ch-pg button). The pill has no height of its own — it was derived from its content: 20px line-height + 8px padding x2 + 1px border x2 = 38px, so it sat 2px shorter than the arrows beside it and the bar read as misaligned. Setting it HERE, once, keeps the two halves honest: both fill the pill via `align-self: stretch` below rather than each restating a magic number. box-sizing is stated because this bundle ships onto pages whose reset we do not control — under content-box the border would push this to 42px. */ box-sizing: border-box; /* Tracks the pager's button size rather than restating it: `simple` and `slim` are 40px, `modern` is 48px, and a pill frozen at 40 would sit visibly short beside a modern pager. The variants set --ch-pg-btn on the bar; 40px is the fallback for a bar that carries no variant at all. */ height: var(--ch-pg-btn, 40px); /* ONE grouped pill: the search half and the sort half share a single rounded container with a divider between them, rather than reading as two separate controls that happen to sit next to each other. */ /* MATCHES THE PAGER'S BUTTONS, deliberately: same border token, same square corners, same surface. The capsule shape and faded hairline this used to carry made the search read as borrowed from another design system when it sits inches from the arrows. `--ch-text-color-accent` with these exact two fallbacks is what `.ch-pg button` declares, so the two track any scheme together. */ border: 1px solid var(--ch-text-color-accent, var(--ch-text-color, rgba(15, 28, 46, 0.16))); /* 8px is what the buttons actually RESOLVE to: `.ch-pg button` declares `border-radius: 0`, but every shipping variant overrides it — `simple` and `slim` to 8px, `modern` to square segments inside a rounded slab. The value to match is the variant's, not the base rule's. */ border-radius: 8px; background: var(--ch-card-bg, transparent); color: var(--ch-card-text-color, var(--ch-text-color, inherit)); transition: border-color 0.15s ease; overflow: hidden; max-width: 100%; } /* SIDES is the default spread, and there the filters pill belongs immediately LEFT of the pager: buttons keep the left edge, filters + paginator group at the right. `margin-left:auto` on the filters pill pushes both of them over as one unit while `space-between` still holds the buttons at the far edge. */ .ch-pgbar--has_filters > .ch-fbar { order: 2; } .ch-pgbar--has_filters > .ch-pg { order: 3; } .ch-pgbar--has_filters.ch-pgbar--sides > .ch-fbar { margin-left: auto; } /* …UNLESS there are no buttons. With three children the auto-margin groups the filters + pager against the right while the buttons anchor the left. With only TWO, nothing holds the left edge, so that same margin collapsed the group and `space-between` then split them the wrong way round — the pager stranded alone on the LEFT and the search pushed to the far right. Dropping the margin lets `space-between` do the obvious thing: search on the left, pager on the right. */ .ch-pgbar--has_filters.ch-pgbar--no_buttons.ch-pgbar--sides > .ch-fbar { margin-left: 0; } /* paginator_first swaps the two halves; the filters pill travels WITH the paginator, staying on its left. */ .ch-pgbar--has_filters.ch-pgbar--paginator_first > .ch-fbar { order: 1; } .ch-pgbar--has_filters.ch-pgbar--paginator_first > .ch-pg { order: 2; } .ch-pgbar--has_filters.ch-pgbar--paginator_first > .ch-pgbar_buttons { order: 3; } .ch-pgbar--has_filters.ch-pgbar--paginator_first.ch-pgbar--sides > .ch-fbar { margin-left: 0; } /* STACKED gives the pill its own row, between the paginator and the buttons. */ .ch-pgbar--has_filters.ch-pgbar--stacked > .ch-pg { order: 1; } .ch-pgbar--has_filters.ch-pgbar--stacked > .ch-fbar { order: 2; margin-left: 0; } .ch-pgbar--has_filters.ch-pgbar--stacked > .ch-pgbar_buttons { order: 3; } /* BREATHING ROOM BETWEEN THE PILL AND THE PAGER. The bar's 16px is tuned for two groups held apart by `space-between`; where the filters pill and the pager end up ADJACENT they read as one undifferentiated run of controls, and the search's end sits almost against the item-count label. The bar's own gap is 14px, so +20% is 16.8px — applied as a 2.8px margin on the seam that needs it. Applied as a margin on the pill rather than raising the bar's `gap`, because the gap is shared with the buttons half: bumping it would also push the buttons away from whatever they sit beside, in every placement. `column-gap` on the pill's own trailing edge only affects the seam that actually needs it. `paginator_first` puts the pager BEFORE the pill, so the space belongs on the pill's left edge there instead. */ .ch-pgbar--has_filters:not(.ch-pgbar--stacked) > .ch-fbar { margin-right: 2.8px; } .ch-pgbar--has_filters.ch-pgbar--paginator_first:not(.ch-pgbar--stacked) > .ch-fbar { margin-right: 0; margin-left: 2.8px; } /* THE PAGER'S BUTTON SIZE, published for the FiltersBar to match. `simple` and `slim` are 40px squares; `modern` runs 48px segments. Declared on the BAR (not the nav) because the pill is the nav's sibling and cannot read a variable set on it. Both channels are covered: the `ch-pg--` class stamped into markup, and the `data-ch-prop-paginator_variant` attribute that carries a per-instance choice to the export lanes. */ .ch-pgbar { --ch-pg-btn: 40px; } .ch-pgbar:has(.ch-pg--modern), [data-ch-prop-paginator_variant="modern"] .ch-pgbar { --ch-pg-btn: 48px; } /* OPTICAL ALIGNMENT WITH THE PAGER. Matching heights is not enough on its own: the `simple` variant reserves an 11px gutter above its buttons for the progress rail, so its nav box is ~51px while its BUTTONS are 40px. Centring the bar's children then lines up the two BOXES and leaves the pill floating visibly above the arrows. Aligning the bar's items to their BOTTOM edge puts the pill on the same baseline as the buttons — the rail keeps its gutter above, and the controls read as one row. Scoped to a bar that actually has a filters pill, so a buttons+pager bar keeps the centring it has always had. */ .ch-pgbar--has_filters:not(.ch-pgbar--stacked) { align-items: flex-end; } /* The buttons half inherits the same bottom alignment — centring it instead would measure it against the TALLER nav box (the rail gutter again) and float it above the pill and the arrows. Stated explicitly rather than left to inherit so the intent survives someone changing the parent's align-items. */ .ch-pgbar--has_filters:not(.ch-pgbar--stacked) > .ch-pgbar_buttons { align-self: flex-end; } /* THE SEARCH HALF. A , so the whole padded area is a click target and a press anywhere in it focuses the input — the input alone would leave the padding and the icon dead. */ .ch-fbar_search { display: flex; align-items: center; gap: 8px; /* Vertical padding is gone: the pill sets the height and this stretches to it, so a padding value here would only fight that and re-introduce the 2px drift. Horizontal padding still owns the click target's width. */ padding: 0 14px; align-self: stretch; cursor: text; min-width: 0; } .ch-fbar_search > i[data-mask-icon] { /* Sized with a rule, never inline: an inline width/height would beat any author selector trying to restyle it. */ width: 16px; height: 16px; flex: none; opacity: 0.5; } /* The input is stripped to nothing — no border, no ring, no background, no platform search decorations — so the PILL is the visible control and the input is just the text inside it. */ .ch-fbar_search > input[data-ch-grid-search] { appearance: none; -webkit-appearance: none; border: 0; outline: 0; background: none; padding: 0; margin: 0; min-width: 0; /* 14ch (~+25% over the original 11ch): enough to read a typical query back without the pill crowding the pager on a mid-width grid. The mobile rule below overrides this to 100% once the pill takes its own row. */ width: 14ch; color: inherit; font: inherit; font-size: 14px; line-height: 20px; } .ch-fbar_search > input[data-ch-grid-search]::-webkit-search-decoration, .ch-fbar_search > input[data-ch-grid-search]::-webkit-search-cancel-button { -webkit-appearance: none; } .ch-fbar_search > input[data-ch-grid-search]::placeholder { color: inherit; opacity: 0.55; } /* THE SORT HALF, divided from the search half by a hairline rather than a gap. */ .ch-fbar_sort { position: relative; display: flex; align-items: center; align-self: stretch; flex: none; } .ch-fbar_search + .ch-fbar_sort { border-left: 1px solid color-mix(in srgb, currentColor 18%, transparent); } .ch-fbar_sort > select[data-ch-grid-sort] { appearance: none; -webkit-appearance: none; border: 0; outline: 0; background: none; /* Right padding leaves room for the chevron, which is positioned over it. No vertical padding — the select stretches to the pill's height instead (see .ch-fbar), so the two halves and the pager all land on 40px. */ padding: 0 30px 0 14px; height: 100%; margin: 0; color: inherit; font: inherit; /* 11px, smaller than the search half's 14px on purpose: the sort is a secondary control the visitor sets once, not the one they type into, and dropping it a step keeps the pill from reading as two equal-weight fields. `ch` is relative to THIS font-size, so 18ch here is a tighter absolute width than 18ch would be at 14px — it buys room for the longer option labels ("Fewest Listings", "Most Listings") without widening the pill as much as the number suggests. */ font-size: 11px; line-height: 20px; cursor: pointer; max-width: 18ch; text-overflow: ellipsis; } /* The dropdown LIST is painted by the OS, not by this stylesheet, and inherits nothing from the pill — on a dark block it would otherwise render dark text on a dark ground in some engines. */ .ch-fbar_sort > select[data-ch-grid-sort] option { color: initial; background: initial; } .ch-fbar_sort > i[data-mask-icon] { position: absolute; right: 11px; width: 14px; height: 14px; opacity: 0.5; pointer-events: none; } /* ACTIVE STATES, mirroring `.ch-pg button:hover` — the accent lands on the border so the pill and the arrows light up the same way. `:focus-within`, not `:focus`: the focusable node is the or the

Create an Account

Create an Account